Fluke 1623-2 GEO Earth Ground Tester

Fluke 1623-2 Offers

The earth ground testers are able to measure earth ground loop resistances using only clamps and are easy to use. For each test, the testers inform you which stakes or clamps need to be connected and the large rotary switch can be used even with a gloved hand.

Features

• 3- and 4-pole fall of potential, earth resistance loop testing
• 4-pole soil resistivity testing
• Selective earth ground rod testing using one clamp
• Stakeless earth ground rod testing using two clamps
• IP56 rated for outdoor use
• USB data storage and transfer

Stakeless testing

With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by one clamp and the current is measured using thesecond clamp. Then the tester automatically determines the resistance of the earth ground rod.

This test method only works if a bonded earth ground system exists for the building or structure under test, but most are. If thereis only one path to ground, like at many residential applications, the stakeless method will not provide an acceptable value and the Fall of Potential test method must be used.

With stakeless testing, the earth ground rod does not need to be disconnected-leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system - a major time saver. You can also perform earth ground tests in places you've not considered before: inside buildings, power pylons, or anywhere you don'thave access to soil.

What's included with the Fluke 1623-2

• Fluke Tester
• Professional Carrying Case
• Batteries
• USB Cable
• Quick Reference Guide
• Users Manual